Custom Pages

Sunday, April 2, 2017

Drawing Symmetrical Chains

Today's post will be about how to draw a symmetrical arc, which can be used to represent chains in tatting diagrams. This is something that has come up in the online Inkscape discussions, and a few members were trying to find solutions to the problem. I found something that works pretty well, and I will share it below.

To begin, open Inkscape and select the Pencil tool. You will need to draw either a horizontal or a vertical line. (Due to limitations in the software, this method will NOT work with diagonal lines. However, after you have made your symmetrical arc, you can always rotate it into the correct position later on).

To draw a horizontal line, use the Pencil tool to click a point on the screen, then hold the CTRL key and click on another point to the right of your original location. The CTRL key will help keep the line in a horizontal position (or a vertical position, if you are drawing a vertical line).


Next, we need to switch to the Node tool (F2) to add a central node to the line. With the node tool, click on your line, and then click on the icon at the top of the screen to "Insert new nodes into selected segments":


This will place a new node in the middle of your line:


Make sure the central node is still selected before proceeding to the next step (the node will be blue when selected). Now, click on the icon at the top of the screen to "Make selected nodes symmetric":


This will change the appearance of the node from a diamond to a square. You should also notice a few small circular icons on either side of the node. These are called node handles:


If you do not see the node handles, please make sure that "Show Bezier handles of selected nodes" is turned on. This icon appears at the top of the screen when the node tool is selected. It looks like this:


To turn the line into an arc, we are going to select and drag the central node while holding the CTRL key on the keyboard. Make sure that the central node is the only node selected for this part (otherwise you will be moving the entire line):


Now it's time to edit the fullness of the arc. For this step, you will be clicking and dragging a node handle while holding CTRL on the keyboard. Remember that the node handles are the small circular icons on either side of the node.

You only have to choose one node handle to drag. The other node handle will automatically adjust along with it (this is what is meant by a "symmetrical node").

In the example below, I've dragged the right node handle to make the arc more full:


This is what the completed symmetrical arc looks like:


I can see this method being useful for creating bookmark or cross diagrams. If you can find a vertically or horizontally positioned chain within a doily diagram, this method can also be used there. Subsequent chains can be copy/pasted from the first chain and rotated and placed as needed.

Here is an example of a simple edging diagram containing symmetrical chains:


Only the first ring, chain, and picot set were drawn. I then grouped the first set, duplicated it, and moved each repeat into position using the arrow keys.

If you have questions about anything contained in this post, feel free to leave them in the comments section below.

13 comments:

  1. I need to try this out. Did you try out my hack - I know it is not up to your exacting standards ;-P
    I'd also be interested in seeing how this looks when it is rotated.

    ReplyDelete
    Replies
    1. Robin, I just tried your method - it works beautifully !!!
      Then I tried my method, with a grid in the background. It worked perfectly, too - when I placed one on top of the other, they were a perfect match! And with fewer steps.
      But I am grateful for sharing this method - it's always nice to have options in one's kitty :-)

      Delete
    2. I haven't tried your method of matching the Bezier chain to an arc/circle yet. You say that you also use a grid in the background? I might have to see a screenshot of that to better understand your setup. Since Inkscape is such a visual medium, it can sometimes be difficult to truly grasp the ideas through text.

      Delete
    3. I do agree about visual versus text ! Unfortunately I don't know how to take a screenshot. I have been trying to go through all the drop menus on Inkscape but can't any command that seems right.
      I am on Windows XP which might the problem perhaps ?
      How do I take a screenshot ?

      The grid acts like a guide, keeping the work symmetrical.
      Also, the nodes can be moved around pretty easily, though sometimes one may get weird shapes if the node is displaced too much.

      Delete
    4. A post I found about how to take screenshots on Windows XP:

      https://www.groovypost.com/howto/microsoft/xp/take-a-screenshot-or-screen-capture-in-windows-xp/

      Emailed you with more detailed information :)

      Delete
    5. I can'thank you enough for this excellent find ! It helped greatly, and I had fun taking shots ! DH patted me when the credit goes to you :-D
      Have just uploaded my shortcut for drawing chains in a row. Check it out ... it's a hurried post so hope no mistakes have crept in.

      Delete
  2. Goodness, I have renewed admiration for those who diagram their tatting patterns!!

    ReplyDelete
    Replies
    1. It can be daunting at first, but it also gets addictive to learn all of the new techniques and how to apply them to tatting diagrams :)

      Delete
  3. This is great info, Robin! Thanks for taking the time to experiment :)

    ReplyDelete
    Replies
    1. You're welcome! I also learn a lot by running these experiments :)

      Delete
  4. Very interesting post, thank you for sharing your knowledge

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete
  6. Thank you Robin for these tutorials. You are a tatting angel!!! I cannot thank you enough!

    ReplyDelete